Wet Scrubbers for Dust, Fumes, Mist...
Branch Environmental supplies custom built scrubbers and
systems for air pollution control. From small units to large custom designed
systems, you receive competitive pricing with the highest reliability and
assurance that the equipment will work right the first time.
|
Packed Towers
Packed Towers are primarily used for gas
absorption. By creating a washing action of
water, many acids or other vapors can be
efficiently absorbed. The exact size is
calculated by our engineering staff for
guaranteed performance. We provide the most
common configurations, including cross and
counterflow designs.
|
 |
Venturi Scrubbers
Venturi Scrubbers are used to remove very fine
dust, mist and can also remove gases. They rely
on a high velocity air flow in the Scrubber to
atomize water and remove particles down into the
submicron range. The open design can handle a
variety of difficult applications.
|
 |
Jet Venturi Scrubbers
Jet Venturi Scrubbers use the energy from the
liquid sprayed under pressure to move the air,
scrub the gas and remove dust. Jet Venturi allow
the use of high liquid rates which are necessary
for some applications. For example, emergency
chlorine Scrubbers often use this design.
|
 |
Impingement Scrubbers
When handling insoluble solids, you might also need high efficiency gas
absorption. The Venturi Scrubbers can handle solids, but have a limited contact
time, so gas absorption is not always complete. The impingement design uses
multiple perforated plates in series to extend the contact time while handling
solids.
|
|
Contact us for further information.
- All performance levels are guaranteed.
- Any material of construction available.
- Complete packages available with all
accessories.
- Shop fabricated units up to 50,000 cfm
(85000 m3/h). Larger sizes are available using
field fabricated designs.
|
|
