 THERMAL OXIDATION
Your Thermal Oxidizer will combine the right
combination of high temperature, turbulent conditions, and residence time
to assure complete combustion of volatile organic compounds or other
contaminants in the air stream.
Thermal Oxidizers can be built to handle any size
volume of gas. However, even with thermal recovery, most units are less
than 20,000 cfm (34000 m3/h).
|
 SOLVENT CONCENTRATION
Where large volumes must be handled, we can provide a solvent
concentration stage using a special media which captures the VOC and then
is regenerated. This allows the released VOC gas to be sent to a much
smaller oxidizer. The result is a reliable system with low operating cost.
|
| CATALYTIC OXIDATION
At lower VOC concentrations (2500
ppm), catalytic oxidation reduces the
cost of fuel significantly.
Typically, operating temperatures will be 1/3 of those used in a
thermal oxidizer. In many cases, only 500-600º F (260-320º C ) is
required for good performance.
Shop fabricated capacities of up to 25,000 cfm
(42500 m3/h) are available.
|
|
