 PACKED
TOWERS
Packed Towers are
primarily used for gas absorption. By creating a washing action of water,
many acids or other vapors can be efficiently absorbed. The exact size is
calculated by our engineering staff for guaranteed performance.
We provide the most common configurations, including cross and counterflow
designs.
|
 VENTURI
SCRUBBERS
Venturi Scrubbers are used to remove very fine dust, mist and can also
remove gases. They rely on a high velocity air flow in the Scrubber to
atomize water and remove particles down into the submicron range. The open
design can handle a variety of difficult applications.
|
|
JET VENTURI SCRUBBERS Jet Venturi Scrubbers use the energy from the liquid sprayed under
pressure to move the air, scrub the gas and remove dust.
Jet Venturis allow the use of high liquid rates which are necessary for
some applications. For example, emergency chlorine Scrubbers often use
this design.
IMPINGEMENT SCRUBBERS When handling insoluble solids, you might also need high efficiency gas
absorption. The Venturi Scrubbers can handle solids, but have a limited
contact time, so gas absorption is not always complete. The impingement
design uses multiple perforated plates in series to extend the contact
time while handling solids.
|
|
